ARDES ARTK44A Folleto De Instrucciones página 5

appliance.
Make sure that the supply voltage correspond to
the voltage marked on the appliance (DC 12V).
If the power cable gets damaged, it has to be
replaced only at a service centre approved by the
manufacturer.
The appliance shall not be exposed to rain.
ATTENTION : read this booklet carefully it contains important instructions for a safe installation, use
and maintenance. Important instructions to be kept for future reference.
Keep handy the guarantee, receipt of payment and these instructions for future use and reference.
After removing the packaging, check the appliance for any signs of damage. In case of visible damage, do not
use it and contact a qualified technician.
Do not leave parts of the packaging with in the reach of children.
This appliance is not a children's toy: it is an electrical device and must be treated with the necessary caution.
Before connecting the appliance, make sure that the power supply voltage matches the indication on the data
plate.
If the plug and socket are not compatible, the socket has to be replaced with a suitable type by skilled persons.
Do not use adapters or extensioncables which do not meet current safety standards or that exceed the current
carrying capacity limits.
When you don't use the appliance disconnect it from the power supply and assure that the interruptor is off.
Do not tug on the power cable or on the appliance it self to remove the plug from the socket.
The use of any electrical appliance requires that a number of basic rulesare observed, namely:
- Never touch the appliance with wet or humid hands.
- Do not leave the appliance exposed to weathering (rain, sunlight).
- Do not subject it to rough handling.
In case of a breakdown or malfunctioning of the appliance, disconnect it at once. Do not attempt to repair it, but
take it to a service centre approved by the manufacturer.
If you decide you do not want to use this appliance any longer, disable it by cutting the power cable - of course,
after disconnecting it from the socket.
The power cable should be extended to its full lenght to avoid overheating.
For safety reasons, the appliance should never be opened.
The appliance has been designed and manufactured to operate as a Portable Mini-fridge. Any other use is
considered inappropriate.
During use, rest the appliance on a flat surface.
Do not connect at the same time power cables.
Water may form inside the compartment due to extensive operation of the appliance. This is normal, as it
concerns the humidity of the air which condenses when the temperature drops. In this case, dry the compartment
thoroughly.
The cooler is not suitable for continuous work. Ice could form on the aluminium cooling plate.
You are advised to switch off the appliance after 6 days consecutive work. The cooler box
can be re-operated after 2 hours.
Keep the casing dry because condensate could form.
When used with a 12 V power supply, pay attention not to frequently switch on/off the car
engine, so the refrigerator box is not constantly shut-off. If the appliance is used with the
engine off, the car engine could go flat.
Connect the power cable to the connector plug corresponding to the connection function you
desire (home or car connection).
The appliance works at maximum cooling capacity; the inside of the casing reaches up to
14°C less than the ambient temperature.
Disconnect the plug from the socket and let the appliance cool down well before cleaning it.
In order to clean the appliance, use a soft or slight damp cloth.
Never use abrasives or chemical solvents.
It is best to store the appliance with the lid open if it is not being used.
NEVER IMMERSE THE APPLIANCE INTO THE WATER.
WArnIngs
InstructIons for use
MAIntenAnce
DC
12V
AC 230V
5