Lindy 38334 Manual De Usuario página 11

User Manual
s cec hdmi out y vol-!
s cec hdmi out y vol+!
s cec hdmi out y active!
r ipconfig!
r mac addr!
s ip mode z!
r ip mode!
s ip addr xxx.xxx.xxx.xxx!
r ip addr!
s subnet xxx.xxx.xxx.xxx!
r subnet!
s gateway xxx.xxx.xxx.xxx!
r gateway!
s tcp/ip port x!
r tcp/ip port!
s telnet port x!
r telnet port!
s net reboot!
set output y volume down by
CEC, y=0~8(0=all output)
set output y volume up by CEC,
y=0~8(0=all output)
set output y active source by
CEC, y=0~8(0=all output)
Get the Current IP Configuration
Get network MAC address
Set network IP mode to static IP
or DHCP,
z=0~1 (z=0 Static, z=1 DHCP )
Get network IP mode
Set network IP address
Get network IP address
Set network subnet mask
Get network subnet mask
Set network gateway
Get network gateway
Set network TCP/IP port
(x=1~65535)
Get network TCP/IP port
Set network telnet port
(x=1~65535)
Get network telnet port
Reboot network modules
hdmi output 1 volume down
hdmi output 1 volume up
hdmi output 1 active source
IP Mode: Static
IP: 192.168.1.72
Subnet Mask: 255.255.255.0
Gateway: 192.168.1.1 TCP/IP
port=8000 Telnet port=10
Mac address:
00:1C:91:03:80:01
Mac address:
00:1C:91:03:80:01
Set IP mode:Static
(Please use "s net reboot!"
command or repower device to
apply new config!)
IP Mode: Static
Set IP address:
192.168.1.100 (Please
use "s net reboot!" command or
repower device to apply new
config!)
DHCP on, Device can't config
static address, set DHCP off
first.
IP address:
192.168.1.100
Set subnet Mask: 255.255.255.0
(Please use "s net reboot!"
command or repower device to
apply new config!)
DHCP on, Device can't config
subnet mask, set DHCP off first.
Subnet Mask: 255.255.255.0
Set gateway: 192.168.1.1
Please use "s net reboot!"
command or repower device to
apply new config!
DHCP on, Device can't config
gateway, set DHCP off first.
Gateway:192.168.1.1
Set TCP/IP port:8000
TCP/IP port:8000
Set Telnet port:23
Telnet port:23
Network reboot...
English