Lindy 38334 Manual De Usuario página 8

User Manual
s reset!
s panel sound z!
r panel sound!
s lock z!
r lock!
s screen on time z!
r screen mode!
s save preset z!
s recall preset z!
s clear preset z!
r preset z!
s logo1
****************!
s logo2
****************!
s baud rate xxx!
r baud rate!
s id z!
Reset to factory defaults
Enable/Disable buzzer function,
z=0~1(z=0 beep off, z=1 beep
on)
Get buzzer state
Lock/Unlock front panel button,
z=0~1 (z=0 lock off,z=1 lock on)
Get panel button lock state
Set screen remain on time,
z=0~4 (0:off, 1:always on, 2:15s,
3:30s, 4:60s)
Get the backlight status of the
screen
Save switch state between all
output port and the input port
to preset z, z=1~8
Call saved preset z scenarios,
z=1~8
Clear stored preset z scenarios,
z=1~8
Get preset z information, z=1~8
Set the logo name displayed on
the first line of LCD screen, the
max character is 16
Set the logo name displayed on
the second line of LCD
screen,the max character is 16
Set the serial port baud rate of
RS02 module,
z=(115200,57600,
38400,19200,9600,4800)
Get the serial port baud rate of
RS02 module
Set the control ID of the product,
z=000~999
Reset to factory defaults
System Initializing...
Initialization Finished!
FW Version x.xx.xx
beep on
beep off
beep / beep off
panel button lock on
panel button lock off
panel button lock on/off
lcd on 15 seconds
Lcd always on
save to preset 1
recall from preset 1
clear preset 1
video/audio crosspoint
logo1:Initializing...
logo2
Baudrate:115200
Baudrate:115200
id 888!
English