Descargar Imprimir esta página

Beurer HD 100 Instrucciones Para El Uso página 13

Manta eléctrica
Ocultar thumbs Ver también para HD 100:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 21
5. Cleaning and maintenance
WARNING
Before cleaning, always remove the mains plug from the socket first. Otherwise there is a risk of electric
shock.
Then disconnect the controller from the electric overblanket by unplugging the plug-in coupling.
CAUTION
• The controller must never come into contact with water or other liquids, as this may cause damage.
To clean the controller, use a dry, lint-free cloth. Do not use any chemical or abrasive cleaning agents.
Small marks on the electric overblanket can be removed with a damp cloth or sponge and, if necessary, with
a little liquid detergent for delicate laundry.
CAUTION
• Please note that the electric overblanket may not be chemically cleaned, wrung out, tumble dried,
put through a mangle or ironed.
Set the washing machine to a particularly gentle wash cycle at 30°C (wool cycle).
Use a delicate laundry detergent and measure it out according to the manufacturer's instructions.
CAUTION
• Please note that frequent washing of the electric overblanket has a negative effect on the product.
The electric overblanket should therefore be washed in a washing machine a maximum of 5 times during its life.
Immediately after washing, reshape the electric overblanket to its original dimensions while it is still wet and
spread it out flat over a clothes horse to dry.
CAUTION
• Do not use pegs or similar items to attach the electric overblanket to the clothes horse. Failure to do
so may damage the electric overblanket.
• Do not reconnect the controller to the electric overblanket until the plug-in connector and electric
overblanket are completely dry. Failure to do so may damage the electric overblanket.
WARNING
• Never switch the electric overblanket on to dry it! Otherwise there is a risk of electric shock.
6. Storage
If you do not plan to use the electric overblanket for a long period of time, we recommend that you store it in
the original packaging. For this purpose, disconnect the controller from the electric overblanket by unplug-
ging the plug-in coupling.
CAUTION
Allow the electric overblanket to cool down before folding. Otherwise
the electric overblanket may be damaged. Do not crease the electric
overblanket by placing items on top of it during storage.
13

Publicidad

loading