Free2Move eSolutions eProfessional Manual De Instalación página 271

Before proceeding with the installation, make sure that:
Input power is completely switched off, and remains so until installation is complete

The work area is adequately cordoned off (access by persons not involved in the work must

be prevented)
Installation should not be carried out with wet hands and no jets of water should be aimed

at the product
The product is not installed in rain, fog or high humidity

The product packaging is perfectly intact and free from obvious damage. If the product is

damaged, please request support from esolutionscharging.com/contact-us/
The product and all components are completely intact and free from any obvious defects or

faults. If any damage is noted, the installation procedure must be abandoned immediately,
and technical support must be contacted.
The dimension of the entire electrical system to which the product is to be
connected must first be determined by a qualified professional. The device's
electrical data, which should be referred to in order to correctly gauge the size
of the power supply system, are displayed on the device's identification label.
13