The appliance is working, but not very well, check
•
The appliance is not overloaded.
•
The thermostat is set to an appropriate temperature.
•
The door is closing properly.
•
The door gasket is sealing properly
•
There is enough ventilation at the side and rear walls.
•
The ambient temperature is between 16°C to 32°C.
The appliance is noisy, check
•
The appliance is level and stable.
•
The cooling gas will make some noise, even when the compressor is
not running.
•
During operation, it is normal for the fan to run, even when the com-
pressor is not running.
The light does not work, check
•
There is power to the appliance.
•
The house fuses or circuit breakers are intact and the fuse in the plug
has not blown.
•
The light button is not set to off.
Please note:
The LED lighting cannot be replaced without a service call
The door will not close properly, check
•
The appliance is level and stable.
•
If the door has been removed, it may not have been correctly refit-
ted.
•
The door seal is dirty.
•
The shelves are not positioned correctly.
The display shows "E1" or "E2"
•
The temperature sensor has failed. Please contact Call Center
- 21 -