Fein WSG10-125S Manual Original página 21

All manuals and user guides at all-guides.com
OBJ_BUCH-0000000034-001.book Page 21 Monday, May 9, 2011 12:44 PM
en Original Instructions for Angle Grinder.
Symbols, abbreviations and terms used.
Symbol, character Explanation
General prohibition sign. This action is prohibited.
Do not touch the rotating parts of the power tool.
Observe the instructions in the text or graphic opposite!
Make sure to read the enclosed documents such as the Instruction Manual and the General
Safety Instructions.
Before commencing this working step, pull the mains plug out of the socket. Otherwise there
will be danger of injury if the power tool should start unintentionally.
Use eye protection during operation.
Use ear protection during operation.
Use protective gloves during operation.
A surface that can be touched may be very hot and thus hazardous.
Gripping surface
Additional information.
Confirms the conformity of the power tool with the directives of the European Community.
This sign indicates a possible dangerous situation that could cause severe or fatal injury.
WARNING
Worn out power tools and other electrotechnical and electrical products should be sorted
separately for environment-friendly recycling.
Product with double or reinforced insulation
Character Unit of measure,
international
n /min
P W
1
P W
2
U
V
f
Hz
M... mm
Ø mm
mm
mm
mm
kg
L dB
pA
Unit of measure, Explanation
national
rpm Rated speed
W Power input
W Output
V Rated voltage
Hz Frequency
mm Size of metric thread
mm Diameter of a round part
mm Ø =Max. diameter of grinding/cutting disc
D
Ø =Diameter of mounting hole
H
T=Thickness of grinding/cutting disc
mm Ø =Max. sanding pad diameter
D
mm M=Thread for clamping flange
l=Length of mounting thread
kg Weight according to EPTA-Procedure 01/2003
dB Sound pressure level
en
21