Descargar Imprimir esta página

Hotpoint Ariston KIX 644 C E Manual De Instrucciones página 7

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 22
Fast Boil- "Booster" function
The booster function for some of the cooking zones may be
used to shorten heating-up times.
It may be activated by pressing the (+) POWER button over
level 9. This function boosts the power to 1600 W or 2000
W, depending on the size of the relevant cooking zone.
The activation of of the booster is signalled by a beep
sound, and the letter 'P' appearing on the display
corresponding to the selected cooking zone
The booster works for max 10 minutes. After these 10
minutes a beep sounds and the cooking zone will
return to level "9"
With the heater at Booster level, if the [+] key is
Touched an error beep sounds and the cookset
doesn't change. With the heater at Booster level, if the
[-] key is Touched a beep sounds and the cookset is
reduced to 9.
Switching off the cooking zones
To switch off a cooking zone touch(-)and (+)
POWER selection buttons simultaneously.
A beep sounds and the corresponding display shows
"0".
Using the Timer
! All the cooking zones can be programmed for a cooking
time duration between 1 and 99 min.
1.Activate the timer by pressing the INCREASE / REDUCE
TIME buttons. A beep sounds, the timer display shows a
"00" and the cooking zone displays show a "t" blinking
indicating that a cooking zone has to be selected.
2 Select the desired cooking zone by pressing any of
the cooking zones (+) or (-)keys. A beep sounds, the
LED next to the cooking zone display starts blinking if
no power is selected, or is on if any power is selected.
The timer display starts blinking indicating that the time
has to be selected
3. Set the desired cooking time by pressing again the
INCREASE / REDUCE TIME buttons.
! The user can select only one heater at a time.
!Pressing and holding the (+) and (-) keys increases
the speed of time selection.
! If the time is not selected before 10 seconds, the
timer is switched off.
! If the selected time is "00" after 10 seconds the timer
is switched off.
Starting Timer countdown.
The countdown starts 10 seconds after the last ope-
ration over the
INCREASE (+)/ REDUCE(-) TIME but-
. If any power is selected, a beep sounds and
tons
the timer display stops blinking. The same happens
to the led heater.
The last minute will be displayed in seconds.
! When the timer is in countdown the user can
change the time at any time by touching the
ASE / REDUCE TIME buttons
stops and the timer changes to time selection status
waiting a time selection.
End of Timer countdown.
When the time set on the timer has elapsed the timed
heater is switched off, the timer display and the timed
heater led starts blinking and a timer alarm beep sounds
for one minute. The timer alarm can be cancelled by the
user at any time, even during the first minute of the alarm
. When the timer is in alarm status, by pressing any key
of the touch control the timer is switched off.
! To cancel the operation of the timer, select the time
value of "00"pressing the(+) and(-) TIME buttons at the
same time.
! When all the cooking zones are not powered, and one
of them is temporized at zero power level, the key-lock
function is activated after 1 minute.
Control panel lock
When the hob is switched on, it is possible to lock the oven
controls in order to avoid accidental changes being made to
the settings (by children, during cleaning, etc.).
Press the
button to lock the control panel: -the icon
will illuminate and an audible beep sound will be emmited.
To use any of the controls (e.g. to stop cooking), you
must switch off this function. Press the
few moments, the icon will stop illuminating and the lock
function will be removed.
All the keys on the cooking zone selection wil be locked
if :the cooktop is off,,
if the Control Panel Lock is activated or
if an error on a cooktop occurs..
Switching off the hob
Press the button
to switch off the appliance - do not
rely solely on the pan sensor.
If the control panel lock has been activated, the controls
will continue to be locked even after the hob is switched
on again. In order to switch the hob on again, you must
first remove the lock function.
INCRE-
. Then the countdown
button for a
7
GB

Publicidad

loading

Este manual también es adecuado para:

Kix 633 c eKix 644 b e