Rowenta PU4010F0 Manual De Instrucciones página 9

STORAGE
When you are not using the appliance, store it in a cool, dry place.
IN THE EVENT OF A PROBLEM
• Never dismantle your appliance yourself. A poorly repaired appliance can cause risks for the user.
• Check the troubleshooting table below before contacting an approved Service Center:
Problem
The appliance will not
switch on.
The flow is a lot weaker
than before.
There is an unpleasant
smell coming from the
air outlet.
WARRANTY
Contact an approved Service Center if:
• your appliance has been dropped
• your appliance or its power cord is damaged
• your appliance is not working properly
LET'S HELP PROTECT THE ENVIRONMENT!
Your appliance contains valuable materials which can be recovered or recycled.
Leave it at a local waste collection point or take to an approved service center so that
it can be processed.
Check
Is the power cord connected?
Are all the display elements off?
Is there a power outage?
Is the front door closed?
Does the filter need to be cleaned
or replaced?
Does the filter need to be cleaned
or replaced?
Solution
Connect the power cord to a plug
with the correct voltage.
Press the start button and select
the required function.
You can use your purifier once the
power turns on again.
Close the front door properly.
Check the filter cleaning and
replacement frequencies and
clean/replace the filter(s) if
necessary.
Check the filter cleaning and
replacement frequencies and
clean/replace the filter(s) if
necessary.
EN
`
9