Publicidad
Idiomas disponibles
Idiomas disponibles
We recommend mowing in the parallel or cross direction. Covering the previous coverage of the machine increases
the effectiveness of the blades and will improve the appearance of the mowed area.
When travelling over uneven terrain the travelling speed may fluctuate.
5.5.4 Travelling on a slope
Riding mowers models GC 92 and GC 110 and GC 132 can work on
slopes with an incline of up to 22° (40%).
When working on a slope it is necessary to adhere to the following
fundamentals:
Pay increased attention when travelling on a slope.
Always use a lower travelling speed and regulate the travelling
speed by moving the driving lever
Only travel perpendicular to the contour, i.e. up and down. Travelling
in the direction of the contour is possible with extra attention only
when turning the machine. If at all possible, avoid travelling along
the contour.
When turning ensure that a wheel does not drive over an elevated
obstacle (rock, tree root, etc.)
Travel slower when travelling down a slope or over obstacles. Pay
special attention when turning and turning around on slopes.
If you stop on a slope, always use the parking brake.
When overloading the machine by travelling on slopes over 18° there is a risk of serious damage to the
gear box. The manufacturer is not responsible for damage caused in this way.
87
Right
Wrong
Publicidad
