Dolmar EV-3213 Manual De Instrucciones página 7

• Check the work area whether
there are no stones, wires,
glass, or other foreign objects.
Foreign object may be caught
up or flung by the machine,
result in damage or injury.
• Operate the machine under
good visibility and daylight
conditions only. Do not operate
the machine in darkness or fog.
• Do not operate machine in
explosive atmospheres, such
as in the presence of flammable
liquids, gases or dust. The
machine creates sparks which
may ignite the dust or fumes.
• Do not expose the machine to
rain or wet conditions. Water
entering the machine may
increase the risk of electric
shock.
Starting up the machine
• Before connect the plug or
switch on the machine:
– Check the plug and cord and
confirm that they are good
condition.
– Check all the screws, nuts
and other fasteners are
properly secured.
– Check cutting tools are in
place and good working
condition.
– Check guards and safe
devices, such as deflectors
or grass catcher, function
well.
– Check the air vents are not
covered by dust or other
foreign materials. Clean
them with a soft brush or
cloth if they are blocked.
– Replace
unreadable labels.
– Check all the parts of
the machine carefully to
determine if it operates
properly
its intended
Especially, never use the
machine if the switch does
not work normally.
– Make sure the switch is off
side to prevent unintentional
start.
– Check
maintenance,
adjusting wrench or spanner
are removed.
• If the supply cord is damaged,
ask Dolmar authorized service
center to replace it, always use
genuine replacement parts.
• Never use the machine if safety
device, such as deflector guard
or grass catcher, is damaged or
missing.
• When turning on the motor:
– Keep your feet away from
the cutting tools.
– Do not tilt the machine.
– Do not stand in front of the
discharge opening.
damaged
and performs
function.
all tools
such
or
for
as
7