Publicidad
Idiomas disponibles
Idiomas disponibles
6.3
Recommended nozzles
The burner complies with the emission requirements of the
EN 267 standard.
In order to guarantee that emissions do not vary, recommended
and/or alternative nozzles specified by manufacturer in the In-
struction and warning booklet should be used.
It is advisable to replace nozzles every year dur-
ing regular maintenance operations.
WARNING
Steinen
type S - Q;
Danfoss
type S - B;
Delavan
type W - B;
Monarch type R.
The use of nozzles other than those specified by
manufacturer and inadequate regular mainte-
nance may result into emission limits non-con-
forming to the values set forth by the regulations
in force, and in extremely serious cases, into po-
tential hazards to people and objects.
CAUTION
The manufacturing company shall not be liable for
any such damage arising from non-observance of
the requirements contained in this manual.
Start-up, calibration and operation of the burner
23
GB
20136933
Publicidad
