Descargar Imprimir esta página

Slime Pro Serie Manual Del Usuario página 6

Ocultar thumbs Ver también para Pro Serie:

Publicidad

Idiomas disponibles

Idiomas disponibles

TROUBLESHOOTING
Inflator does not turn on:
1. Thermal fuse may have tripped. Allow unit to cool for 25 minutes and retry.
2. Ensure connection is secure.
3.Make sure connections and terminals are free of corrosion, debris, etc.
Inflator runs but does not inflate:
1. Be sure the air hose connector is secured tightly onto the valve stem.
2. Check tire for leaks. Check hose for breaks and leaks at fittings.
Inflator runs slowly:
1. The inflator may have overheated from excessive use. Shut it off and allow it to cool for 25
minutes.
2. The voltage may be too low. Check the condition of your vehicle's battery.
NOTE: If tire is totally deflated, it is possible that the tire could separate from the rim allowing
air to leak out when trying to inflate. In the event this occurs, it may be necessary to jack up the
tire prior to inflation.
Dispose of this product at an e-waste recycling collection point or facility.
Do not place in the trash or standard recycling receptacle.
FOR WARRANTY INFORMATION GO TO: WWW.SLIME.COM / WARRANTY
QUESTIONS OR COMMENTS: Call (888)457-5463 or visit www.slime.com
ITW Global Tire Repair • 125 Venture Drive, Suite 210, San Luis Obispo, CA 93401 USA
Slime
is a trademark of Illinois Tool Works, Inc., registered in the U.S. and other countries.
®

Publicidad

loading

Productos relacionados para Slime Pro Serie

Este manual también es adecuado para:

Pro power 40048