Publicidad
Idiomas disponibles
Idiomas disponibles
Control setting
1. Swing key
2. Timer key
3. Fan speed selection key
When the device is powered on for the first time, you will hear a small beep, and the
devices display window will light up.
1.
Swing Key: Press this swing key button and the swing leaf will start to swing up
and down.
2.
In case of power on, press this key to close the timer. In case of power off, press
this key to open the timer. Press the key when the timer symbol flashes, press
the up and down keys to select the required timer value. Timer values can be set
between 1-24 hours and the timer value is adjusted up or down by one hour.
3.
Fan Speed Selection Key: In cooling mode, press this key to select high or low
fan speed. In fan mode, press this key to select high or low fan speed. In
dehumidification mode, pressing the key has no effect and the fan will always run
at low speed.
4/6. Up Key and Down Key: Press these two keys to change the temperature|
or time setting, operate as follows: While setting the temperature, press
the up or down key to select the required temperature (not available in
fan or dehumidifying mode). While setting the time, press the up or down
key to select the required time.
5.
Display window: The display window will show the temperature + when you
press the timer button you can set-up the time.
7.
In case of power on, press the key to switch between the modes cooling →
dehumidifying → fan → cooling
8.
Sleep Mode key:
In cooling mode, press the up and fan keys to turn on sleep mode,
then the unit will work in an energy-saving quiet mode.
4. Up key
5. Display window
6. Down key
10
7. Mode selection key
8. Sleep mode key
9. Power key
Publicidad
