Fast Fowarding And Reversing Disc Play; Track Search; Disc Search; Direct Track Search - Kenwood KDC-C519FM Manual De Instrucciones

Fast Forwarding and Reversing Disc Play
Fast Forwarding Disc Play :
Hold down on the ¢ button.
Release your finger to play the disc at that point.
Reversing Disc Play :
Hold down on the 4 button.
Release your finger to play the disc at the point.

Track Search

Search forward or backward through the tracks on the disc until
you reach the one that you want to listen to.
Making a Reverse Track Search :
Press the 4 (T. DOWN...Remote
desired track number.
Press once to search back to the beginning of the current track,
twice to search back to the beginning of the previous track, and
so forth.
Play starts at the beginning of the displayed track number.
NOTE
Pressing the 4 (T. DOWN...Remote
track 1 will only search back to the beginning of that track. The
reverse search is not "recycled" to the last track on the disc.
Making a Forward Track Search:
Press the ¢ (T. UP...Remote
track number.
Press once to fast forward to the next track, twice to fast
forward to the track after that, and so forth.
Play starts at the beginning of the displayed track number.
NOTE
You cannot make a forward track search when listening to the last
track on a disc.
)
button to display the
)
button while listening to
)
button to display the desired

Disc Search

Search forward or backward through the discs in a disc
changer.
Making a Reverse Disc Search :
–
Press the button to display the desired disc number.
Each time the button is pressed, the displayed disc number
decreases by one.
Play starts at the beginning of the displayed disc.
Making a Forward Disc Search :
+
Press the button to display the desired discnumber.
Each time the button is pressed, the displayed disc number
increases by one.
Play starts at the beginning of the displayed disc.

Direct Track Search

Using the remote, directly input the track number that you want
to listen to.
1
Using the number buttons on the remote, input the number of
the track that you want to listen to.
The selected track number will blink in the display for 10
seconds.
If you make no further input in the 10-second period, the
number entry mode will automatically be canceled.
2
Press either the T. DOWN or T. UP button while the track
number is blinking.
The track starts playing.
Canceling Direct Track Search While It Is Operating :
Press the 38 button.
— 9 —
Function of Remote