Publicidad
Idiomas disponibles
Idiomas disponibles
Cleaning
Clean the appliance every time you have used it with the cleaning brush
and with warm water (max. 40°C).
Never use compressed air, scouring pads, abrasive cleaning agents
or aggressive liquids such as petrol, acetone or ethereal oils to clean
the appliance.
Note: The appliance does not need any lubrication.
1
Switch off the appliance and disconnected it from the mains.
2
Remove the comb from the appliance and rinse it under the tap.
3
Brush the outside of the shaving unit with the brush supplied.
4
Push the centre top end of the cutting element upwards with
your thumb until it opens.
5
Use the cleaning brush to remove the cut hair.
Clean the appliance under a warm running tap to flush out the
6
cut hair.
English
9
Publicidad
