English
Remove the condenser filter (see fig. 2.1), and clean it with a vacuum cleaner and if necessary a
light soap solution.
Do NOT use cleansers containing chlorine or other harsh
cleansers, as these can damage the stainless steel surfaces
and the internal cooling system.
Clean the condenser and the compressor compartment using
a vacuum cleaner and a stiff brush.
Do NOT hose the compressor compartment with water as this
can cause short circuits and damage on the electrical parts.
Service
The cooling system is a hermetically sealed system and does not require supervision, only
cleaning.
If the cabinet fails to cool, check if the reason is a power cut.
If you cannot locate the reason to the failure of the cabinet, please contact your supplier. Please
inform model and serial number of the cabinet. You can find this information on the rating label
which is placed inside the cabinet in the top right hand side.
Disposal
Disposal of the cabinet must take place in an environmentally correct way.
Please note existing regulation on disposal. There may be special requirements and conditions
which must be observed.
7