Descargar Imprimir esta página

Black and Decker REVDS12C Manual De Instrucciones página 26

Lijadora de acabados inalámbrica
Ocultar thumbs Ver también para REVDS12C:

Publicidad

Idiomas disponibles

Idiomas disponibles

ENGlIsH
Recommended accessories for use with your product
are available at extra cost from your local dealer or
authorized service center. If you need assistance in
locating any accessory, please contact BLACK+DECKER call
1‑800‑544‑6986.
PROTECTING THE ENVIRONMENT
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your BLACK+DECKER
product needs replacement, or if it is of no further
use to you, do not dispose of it with household
waste. Make this product available for
separate collection.
Separate collection of used products and packaging
allows materials to be recycled and used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand for
raw materials. Local regulations may provide for
separate collection of electrical products from the
household, at municipal waste sites or by the retailer
when you purchase a new product.
Batteries
BLACK+DECKER batteries can be recharged many
times. At the end of their useful life, discard
batteries with due care for our environment:
f Run the battery down completely, then remove it from
the tool.
f NiCd, NiMH and Li-Ion batteries are recyclable.
Take them to any authorized repair agent or a local
recycling station.
24
SPECIFICATIONS
Voltage
No-load speed
Oscillating angle
Sanding base surface
Weight
*Maximum initial battery voltage (measured without a
workload) is 12 volts. Nominal voltage is 10.8.
Integral Battery
Battery type
Capacity
Charger
Input voltage
Output voltage
Current
Approx. charge time
12 V Max*
11000 OPM
o
2.8
5078 mm
2
0.862 kg
Li-Ion
1.5 Ah
100-240 V
AC
14 V
DC
400 mA
4 hours

Publicidad

loading