Publicidad
Idiomas disponibles
Idiomas disponibles
When using the hose connector, separate the front and rear
of the gun and remove the paint tank.
1. Fit the hose connector and tighten the nut;
2. Connect one end of the water hose to the accessory and
the other end to the tap;
3. Open the water and let it run until clean water comes out
of the suction tube.
Cleaning
After each use, remove all debris and clean all machine's
parts. Wipe the power tool with a clean, damp cloth or blow
it with low pressure compressed air.
Careful handling protects the power tool and extends its
service life.
Storage
Store the paint sprayer in its original packaging in a clean,
dry place out of children's reach.
The packaging is made up of recyclable materials,
which you can dispose on local recycling points.
Never dispose of power tools with your household
waste!
According to the European Directive 2012/19/EC on
electrical and electronic equipment waste and its
transposition into national law, power tools must be
collected separately and delivered to the collection sites
provided for this purpose.
You can get information regarding the disposal of the power
tool through the person in charge for recycling in your city.
WhatsApp:
+351 965 157 064
E-mail:
support@vito-tools.com
Publicidad
