Publicidad
Idiomas disponibles
Idiomas disponibles
TV Playback or Viewing
Connect Camcorder to a TV to view
playback or recordings in progress.
Connections
Audio/
Video Out
VCR Playback using PlayPak
Load Battery in PlayPak
Insert
Cassette in PlayPak
1
2
3
Remove
Cassette
1
2
Playing Back Recordings
Before you begin...
• Connect Camcorder to power source.
• Make all TV-Camcorder connections.
Remove Battery lid and insert AA battery.
• Do not reverse polarity.
• Replace battery when tape loading/unloading takes longer
than usual.
1
Turn
arrow to take up any slack.
2
Slide RELEASE to open cassette lid.
3
Insert the
the left, then snap lid shut.
• Do not obstruct cassette
reel while loading.
• Allow PlayPak Load
Detector to fully retract
before using in VHS VCR.
1
Slide RELEASE and wait for lid to open.
2
Push cassette out through hole in bottom of
PlayPak with your finger.
1
Set POWER to:
© view playback.
VCR
CAMERA © view picture as it is
recorded.
2
Turn TV ON and set to LINE INPUT.
See TV owner's manual.
3
Begin playback or recording.
cassette Tape Wheel in direction of
cassette with the window up and on
Load Detector
21
Publicidad
