Junghans FORM MEGA Instrucciones De Uso página 6

Time zones (as of: 1 January 2018):
The table below is based on UTC Standard Time (Coordinated
Universal Time). In summer time, the time changes by one
hour.
City Time zone
crown position B
London +/– 00
Frankfurt / Paris + 01
Athen + 02
Moscow + 03
Tehran / Iran + 03.30
Dubai / UAE + 04
Kabul + 04.30
Karachi + 05
Calcutta + 05.30
Kathmandu + 05.45
Dhaka + 06
Rangoon + 06.30
Bangkok + 07
Beijing + 08
Pyongyang + 08.30
Eucla (Aus) + 08.45
Tokyo + 09
Adelaide (Aus) + 09.30
Sydney (Aus) + 10
Lord Howe Island + 10.30
Nouméa + 11
Norfolk Island + 11.30
Auckland + 12
Chatham Islands + 12.45
Apia + 13
Chatham - SZ + 13.45
Kiritimati + 14
Baker Island – 12
Midway Islands – 11
Hawaii – 10
Marquesas Islands – 09.30
Anchorage US Alaska – 09
US Pacific – 07
Denver US Mountain – 08
Chicago US Central – 06
New York US Eastern – 04
US Atlantic – 05
St. John's – 03.30
Rio Brasilien – 03
South Georgia – 02
Azores – 01
4. Time synchronisation
The Junghans MEGA offers you 2 options to synchronise the
time:
4.1. Synchronisation using the Junghans App:
With the Junghans App, you can synchronise your watch
with the time data stored in your smartphone.
1. Download App
2. In the menu, select: Set MEGA watch
3. Select "HELP" button for instructions
4.2. Synchronisation via a radio signal
If you are within the transmission range of one of the time
signal transmitters, you can synchronise the time manually.
Your Junghans MEGA can receive radio signals from the fol-
lowing time signal transmitters:
Time zone
– Europe: DCF77 in Mainflingen
crown position C
– UK:
+/– 00
– Japan: JJY40 near Tokyo and JJY60 near Osaka
+ 01
– USA:
+ 02
+ 03
The range of the transmitters is up to 1500 km depending on
topographical conditions.
+ 04
+ 05
+ 06
+ 07
+ 08
Press the corrector in crown position A for 4 seconds. The
watch checks various time signals. During this process, the
second hand remains at the 10 o'clock position for up to
+ 09
2 minutes and then at the 8 o'clock position for up to 15 min-
utes. The hour and minute hands remain at their current
+ 10
position. As soon as a time signal is received, all hands are
automatically set to the time of the time signal transmitter.
+ 11
If time synchronisation with one of the transmitters is not
+ 12
possible, the reception attempt is terminated after 15 min-
utes. Your watch runs on the basis of a quartz watch until
the next synchronisation.
You can cancel manual time synchronisation prematurely as
soon as the second hand reaches the 8 o'clock position. To
do this, briefly press the corrector or pull the crown and push
– 11
it back to position A. The minute and hour hands are reset to
– 10
the original time.
Note: For the best possible reception conditions during time
– 09
synchronisation with one of the time signal transmitters,
– 07
place the watch near a window. Avoid placing the watch next
– 08
to electrical appliances, mobile phones, cordless phones or
– 06
lamps that are powered by transformers. If the watch still
– 04
does not receive a time signal, change the position of the
– 05
watch.
– 03
Reception indicator
– 02
You can check the reception status of your watch at any
– 01
time. To do this, press the corrector for less than 3 seconds
in crown position A. The second hand shows the current
reception status for 4 seconds:
H11 = Junghans time signal
(via Junghans App)
MSF in Anthorn, Cumbria
WWVB in Boulder, Colorado
Reception phase
Junghans App
H10
A
4 Sek.
H8
4 sec.
Reception phase
time signal transmitter
H1 = EU
H9 = US
H3 = UK
H7 = JP (JJY40) H5 = JP (JJY60)
H6 = No reception
5