49
1. Remove the Meter (No. 10) from Main Frame (No. 1). Then disconnect the link wire of Inductor (No.
49) from the Meter (No. 10).
2. Remove the plastic cap from the back of Meter (No. 10).
3. Remove the old battery and insert the new battery using your fingers. Ensure that the positive side of
the battery which is labeled with a + sign is facing upward once the battery is in place.
4. Put the plastic cap onto the battery seat.
5. Reconnect the link wire of Inductor (No. 49) to the back of Meter (No. 10).
6. Reattach Meter (No. 10) onto Main Frame (No. 1).
The replacement is complete!
BATTERY REPLACEMENT
10
BATTERY
PLASTIC CAP
1
15
Version 2.3