ASA Electronics JHD40BT Manual De Instalación Y Funcionamiento página 11

MP3/WMA OPERATION
NOTE: The key pad may vary slightly in shape depending on the model and revision
MP3/WMA File Requirements
This unit can play MP3 (MPEG1, 2, 2.5 Audio Layer 2/3) and WMA (version 7/8/9).
Media Requirements
The following formats are available for the media used in this unit. The maximum number of
characters used for file name including the delimiter (".") and three-character extension are
indicated in parentheses.
•
ISO 9660 Level 1 (11 characters)
•
ISO 9660 Level 2 (31 characters)
•
Joliet (31 characters)
•
Romeo (31 characters)
The media reproducible on this unit has the following limitations:
•
Maximum number of nested folders: 8
•
Maximum number of files per device: 999
•
Maximum number of folders per device: 99
Use the following settings when compressing audio data in MP3 data with the MP3 encoder.
•
Transfer bit rate: 32 – 320 kbps
•
Maximum file/directory name: 64 bytes
ID3 Support
This unit supports ID3 tag versions 1.0, 1.1, 2.0 and 2.3 (Max 32 bytes).
Installing a USB Device
Insert your USB drive into the USB connector routed from the rear of the radio. The unit will
automatically search for MP3 and WMA files on the device and begin playback. You can access
USB mode from any other mode by pressing the MODE button (4).
WARNING: Do not remove the USB device when USB PLAY mode is active. Press MODE
(4) to change to another mode before removing the device.
Controlling Playback
Pause/Play
Press the 1 „ || button (5) to suspend playback. Press the 1 „ || button again to resume play.
Track Select
Press the SEEK/TUNE/TRK / ►► (14) or
than one second to advance to the next file, or press and hold to fast forward or fast reverse.
Playback begins when the button is released.
Repeat (RPT)
Press the 2 RPT / button (6) to repeatedly play the current file. Press 2 RPT /
repeat all songs in the current folder. Press 2 RPT /
11
SEEK/TUNE/TRK / ◄◄ (13) button for less
again to
a third time to resume normal playback.