ASA Electronics JHD40BT Manual De Instalación Y Funcionamiento página 7

BASIC OPERATION
NOTE: The key pad may vary slightly in shape depending on the model and revision
Power On/Off
Press the power button (1) on the front panel to turn the unit on or off.
Volume Control
To increase the volume, press the VOL+ UP /▲ button (2a). To decrease the volume, press the
DOWN VOL- / ▼button (2b).
Mute
Press the MUTE button (17) on the control panel to mute the audio output. Press MUTE again to
restore the audio output to the previous level.
Mode
Press the MODE button (4) on the control panel to select a different mode of operation, as
indicated on the display panel. Available modes include AM/FM Tuner, Weatherband, USB, AUX
In (optional Auxiliary Input), and BT Audio.
Reset
The reset button should be activated for the following reasons:
•
initial installation of the unit when all wiring is completed
•
function buttons do not operate
•
error symbol on the display
Use a ball point pen or similar object to press the RESET button (19). This may be necessary
should the unit display an error code.
You can recover factory default settings using the RESET function located on the system menu.
With "RESET To Defaults?", press the INFO/ENTER button (18) to activate.
NOTE: The reset button may vary in location depending on the model and revision
Audio Menu
Press the AUDIO/MENU button (3) on the control panel to access the audio menu. You can
navigate through the audio menu items by pressing the AUDIO/MENU button repeatedly. Once
the desired menu item appears on the display, adjust that option by pressing the VOL+ UP /▲ or
DOWN VOL- / ▼ buttons (2) within 5 seconds. The unit will automatically exit the audio menu
after five seconds of inactivity. The following menu items can be adjusted.
Bass
7