TCL LINKZONE 5G UW Guía De Referencia Rápida página 4

Setting up TCL LINKZONE 5G UW
Your device has a Verizon 5G SIM card already
installed.
If the SIM card must be replaced:
1. Open the back cover, remove the battery, and slide
the SIM card out of the SIM Card slot.
2. To reinstall it, align the cutout tab using the diagram
and gently slide the card into the slot with gold metal
side down.
3. Reinstall the battery.
4. Close the back cover.
1
3
NOTE: Only a Verizon Nano SIM card can be used.
2
4
EN-6
Step 1: Insert the Battery
To Install the battery:
1. Align the metal contacts with the pins inside the
battery compartment.
2. Press the battery down until it properly sits in place.
3. Press the back cover into place by aligning the tabs.
It only fits one way.
1
Step 2: Charge the TCL LINKZONE 5G UW
1. Connect one end of a USB-C cable to the device and
the other end to a wall charger.
2. Insert the wall charger into AC power source and
charge LINKZONE for 2 hours.
2 3
EN-7