Frizzlife PX500-A Manual Del Propietário página 14

Model: PX500-A
Note: All the service life of the filter cartridge listed are based on actual laboratory
!
test and the provided water. The actual service life of filter cartridge depends
on source water quality and daily water usage.
9. Filter Replacement Instruction
Step 1: Cut off the power and turn on the water faucet to release water pressure
Cut off the water supply and power before replacement. (Fig.35, Fig.36)
Turn on the water faucet to release water pressure.（Fig.37)
Remove the front cover of the filter. （Fig.38)
Unscrew the cartridge needs to be replaced counter clockwise.（Fig.39）
Screw the new cartridge clockwise into the system.
Connect the power code and turn on the water supply. （Fig.40)
Fig.35
Fig.38
A
3 TC-A
Step 2: Reset the filter lifetime
Long press the "Reset" button for 3 seconds, the buzzer will beep and you can start
to select the filter you want to change. Press "Flush"button to change between the
filters and the selected filter lifetime indicator will flash. After selecting the filter,
long press "Reset" button for 3 seconds. You will hear a beep. The selected filter's
indicator will turn into blue light, which means the filter is successfully reset. If you
do not operate within 10 seconds, it will automatically exit this mode and resume
normal display.
Fig.36
Fig.39
Fig.37
Fig.40
EN