Frizzlife PX500-A Manual Del Propietário página 9

Model: PX500-A
Step 6: Connect the "WASTE" water tubing
Insert the other end of 1/4" red tubing into the "Waste" port on the back of the
system. （Fig.18, Fig.19）
Fig.18
Step 7: Connect the "FILTERED" water tubing
Cut the 1/4" white tubing in proper length, and insert one end into the "Filtered"
port on the back of the system. (Fig.20)
Step 8: Install the drinking faucet
Note: If the thickness of your counter is over 1.5" (3.85cm), please contact us at
!
support@frizzlife.com to claim for longer stem.
Note: If your counter top or granite does not have an existing hole, please drill
!
one (1/2") before proceeding.
Follow the steps below and mount the faucet onto the sink top.
(Fig.21, Fig.22, Fig.23)
Mount the rubber and fasten the hand fixture underneath (Fig.24, Fig.25, Fig.26)
Connect the other end of 1/4" white tubing from the "FILTERED" port into the
1/4" quick fitting. (Fig.27, Fig.28, Fig.29)
Fig.19
Fig.20
Note: Please make sure the tubings are fully inserted,
!
otherwise may result in water leakage.
EN