Mophie juice pack Manual Del Usuario página 7

1. Clean the mounting location.
2. Remove the protective sheet from the bracket's
suction cup. Do not remove the protective
sheet until you're ready to attach the bracket to
the mounting location.
NOTE: The suction cup is made of a special material
that even adheres to soft or uneven dashboards and
consoles. Although it feels sticky to the touch, the
suction cup will not leave any residue if you remove
the bracket.
3. Place the suction cup on the mounting location
and press down on the locking lever to secure
the bracket in place.
4. Remove the protective sheet from the back of
the dock.
5. Attach the dock to the bracket by slipping its
openings over the clips on the bracket, then
pull down slightly on the dock to secure it on
the bracket.
Plug the dock's USB connector into the supplied car
charger and insert the car charger into the vehicle's
12V power outlet.
• Make sure the dock's power cable is clear of the
pedals and does not otherwise interfere with
your operation of the vehicle.
7