Descargar Imprimir esta página

Fired Up Corporation OKO S1 Manual De Seguridad página 7

Ocultar thumbs Ver también para OKO S1:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 61
DO NOT use this bio-ethanol fire on anything other than a suitably strong,
stable, flat, level, permanent, heat and scratch resistant, low surface in a well
ventilated area.
DO NOT reposition the fire when in use, only move the fire when it has
cooled completely.
DO NOT position the fire below a wall-hung television, or beneath
overhanging lights.
DO NOT locate the fire within 1m of a television.
DO NOT locate the fire in an area where children and/or animals play.
See minimum requirements for combustible distances on page 10.
If enclosures dont allow for the distances stated on page 10, you MUST use
non- combustible materials.
ADDING FUEL
This product is ONLY suitable for use with bio-ethanol liquid fuel.
ALWAYS follow the fuel safety guidelines on the back of the bio-ethanol fuel
bottle.
DO NOT use petrol, white spirit, lighter fluid, alcohol, gel fuel, citronella oil or
similar chemicals to light the fire as this will damage the product and may cause
property damage, serious injury or death.
ALWAYS inspect the unit prior to adding fuel for fatigue and damage and
replace as and when necessary.
ALWAYS use the funnel provided to fill the fuel tray.
ALWAYS ensure that the whole unit and fuel container is fully extinguished and
cool prior to fueling.
DO NOT re-fill the fuel tray with bio-ethanol liquid when the bio-ethanol fire
is in use or still hot.
DO NOT OVERFILL THE FUEL TRAY WITH FUEL
There is a maximum level mark on the inside of the fuel tray. DO NOT fill the fuel
tray with bio-ethanol liquid above the maximum mark.
If any spillages have occurred when filling the fuel tray, ensure you clear up the
spilled fuel before use. Any fuel spilled can be removed by wiping the fuel up
with a dry cloth then removing any remaining residue with a damp cloth
DO NOT use any chemicals to clean up spillages or to clean the bio-ethanol
fireplace.
Only use luke warm water and a soft cloth to clean the bio-ethanol fire.
Only add more bio-ethanol liquid when the flame has been properly
extinguished and the fire is COMPLETELY COOL.
DO NOT POUR FUEL DIRECTLY ONTO A LIT FLAME, OR INTO A
WARM FUEL CONTAINER.
LIGHTING
NOTE: Before lighting we highly recommend familiarising yourself with the procedure(s)
for extinguishing the fire.
Ensure there are no flammable materials within 1m of the bio-ethanol fire.
DO NOT ignite the device if it is still warm.
DO NOT smoke when lighting the fire.
DO NOT light the fire in a room which already contains a burning fire.
To light the bio-ethanol liquid fuel use a long stem lighter at arms length at a
minimum distance of 140mm from the handle of the lighter to the opening of
0 7

Publicidad

loading