Publicidad
Idiomas disponibles
Idiomas disponibles
the bio-ethanol burner.
•
It is recommended that you use heat resistant gloves (not supplied) when
preparing
this unit for use and lighting the bio-ethanol liquid.
•
The extinguishing plate must remain completely open once the bio-ethanol
liquid fuel has been lit. When you want to extinguish the flame and when NOT in
use, the extinguishing plate must remain firmly closed.
DURING USE
•
After approximately 5 minutes the flame will change from a small blue flame to
a larger yellow flame and will burn hotter than when first lit.
•
Once alight DO NOT move or handle the bio-ethanol fire as it will be hot.
•
The metal extinguishing tool should be kept close to the fire at all times,
especially when alight.
•
DO NOT leave unattended.
•
Beware of hot surfaces.
•
DO NOT touch the flame.
•
DO NOT put anything on top of the fire or cover the fire and/or the
fire glass.
•
DO NOT smoke in the vicinity of the fire.
•
DO NOT close all windows and doors whilst the fire is in use.
•
DO NOT use this product in a strong draught or wind.
•
DO NOT light the fire in a room which already contains a burning fire.
•
DO NOT use this bio-ethanol fire in the rain.
•
DO NOT move the bio-ethanol fire whilst alight as it will be hot.
•
ALL of the bio-ethanol fire surfaces will become hot during use: HANDLE
WITH CAUTION.
•
Keep children and pets at a safe distance from the bio-ethanol fire when
in use, whilst still hot or with hot fuel.
•
DO NOT leave children unattended with the fire whilst in use, still hot or with
hot fuel.
•
DO NOT reposition the fire when in use, only move the fire when it has
cooled completely.
EXTINGUISHING
•
It is recommended that heat resistant gloves (not supplied) are used when
handling any part of the fire.
•
Keep the extinguishing tool with the fire at all times.
•
DO NOT douse the bio-ethanol fire with water even in an emergency.
•
DO NOT attempt to blow out the flame, as the additional airflow will increase
the flame size and strength and not extinguish the flame.
•
To extinguish the bio-ethanol fire allow all bio-ethanol liquid to burn completely
so there is no residue remaining in the fuel tray.
•
If the fire is burning, using the extinguishing tool provided close the extinguishing
plate
covering the fuel tray completely, this will starve the flame of oxygen preventing
it from burning.
•
Keep the stainless steel extinguishing plate firmly closed until the whole product
is cool and the flame is extinguished.
•
The fuel tray MUST be completely covered by the extinguishing plate.
•
DO NOT handle or return to the product until the flame has been completely
extinguished.
•
Once the fire is completely cool you may return to the product.
0 8
Publicidad
