Keeper FOREST 10 Manual De Usuario página 20

3 STARTING UP
Before starting work, you must complete charging the battery (during
storage may have lost part of its load)
To do this, plug the charger into the mains electric web and connect it to the
battery, the battery must be disconnected from the sprayer.
Note in the charger the indicator is green when it is plugged into the network, and
turns red when the battery is connected to (begin charging the batteries).
When the battery is fully charged the indicator changes from red to green.
The operating temperature range of the sprayer is 1 ° to 50 ° C.
Follow these steps to put your backpack running:
- Attach the LANCE to the hose of the pack and, if necessary, install
the protective hood (optional accessory).
- Install the accessory lance vholder in the deposit housing (see
Figure 1)
- Insert the battery pack ref. 9030 in its housing, to do this you
should open the log at the back of the sprayer and insert it into the
correct position until the lever lock/unlock is locked as seen in g. 2.
20
Figure 1
Figure 2