auna 388-BT Manual Del Usuario página 38

EN
38
Encoding bit rate (via remote control)
You can set the bit rate according to your quality and storage needs. The
range is 32/64/96/128/192/256 kbps.
• Select "Phono" (6) and remain in stop mode.
• Press "Info" and the LCD display (2) will show the
standard bit rate (128 kbps).
• Use (13,24) to set the bit rate.
• Press "Info" again to confirm and the display will show "Phono" again.
Title separation (via remote control)
You can divide the music recorded from vinyl to USB in tracks. Each time
you press "TB", a new file / title is created. The text "PHONO" or "TAPE"
flashes briefly on the display (2) as confirmation.
DELETE FILES FROM USB
Delete a file
• Select the USB mode.
• Press and hold "Info" for 3 seconds and the display (2) will show (del
---001).
• Now use (13,24) to select the file to be deleted.
• Press "REC" and then use (13/24) to select "yes/no".
• Press "REC" to confirm the entry.
Delete all files (via remote control)
• Select the USB mode.
• Press and hold "Info" for 3 seconds and the display (2) will show (del
---001).
• Press and hold "Info" again and you will see a flashing "format y/n".
Now use (13/24) to select y (yes) or n (no).
• Press "REC" to confirm the entry.