Publicidad
Idiomas disponibles
Idiomas disponibles
Installation (continued)
6
Inserting the 3/4 in. tube into the
straight tube
NOTE: After inserting the 3/4 in. tube (E) into the straight
tube (D), the transition ring (K) may need to be re-inserted.
□ Place the small end cap (G) onto the 3/4 in. tube (E).
□ Insert the transition ring (K) into the straight tube (D).
□ Slide the 3/4 in. tube (E) through the transition ring (K) and
into the straight tube (D).
7
Connecting the small tube to the
bottom shelf assembly
□ Place the large end cap (H) on the short tapered tube (C).
□ Slip the tapered end of the short tapered tube (C) into the
untapered end of the bottom tube of the assembly.
□ Place the tape strips (M) around the seams of the tubes.
E
K
D
M
C
8
G
E
K
D
bottom shelf assembly
tapered end
C
H
Publicidad
