Daikin Altherma FWXV10ABTV3 Manual De Instalación página 9

U I S
2.5 Removing the side panels
To remove the side:
- remove the sides upwards
2.6
Vertical installation
Using the paper template, trace the position of the two
fixing brackets on the wall. Use a suitable drill to make the
holes with and insert the wall plugs (2 for each bracket); fix
the two brackets. Do not over-tighten the screws so that
the brackets can be adjusted with a spirit level.
Install the unit at level (with a possible 1 to 2% inclination
towards the drainage pipe to facilitate the flow of water).
Fully tighten the four screws to block the two brackets.
Check the stability by manually moving the brackets to the
right and to the left, up and down.
A
Wall plugs
A
Side
B
Machine body
A
B
Mount the unit, checking that it fits correctly onto the
brackets and checking that it is stable.
Note: to facilitate the connection of the pipes to the fancoil
connections, install a built-in box at the outlet of the pipes
themselves.
The correct position of the box is indicated on the
installation template.
B
Brackets
A B A
B
INSTALLATION
A
EN
9