Bunn DUAL & SINGLE SH DBC Manual De Capacitación Técnica página 273

ITEM PART NO.
Note: The following parts are not illustrated
39 32647.0000
32647.0007
32647.0003
32647.0008
32647.0004
32647.0009
32647.0010
32647.0011
40 27791.0001
27791.0004
41 37859.0002
42 03851.0000
43 02244.0000
44 34707.0000
34707.0003
45 27945.0005
46 38338.0000
47 23799.0001
* Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement.
ELECTRICAL CONTROLS
QTY. DESCRIPTION
1 Wiring Harness, Main 120/240V (Brewers prior to 08/01/05)
1 Wiring Harness, Main 120/240V (Brewers after 08/01/05)
1 Wiring Harness, Main 230V (Brewers prior to 08/01/05)
1 Wiring Harness, Main 230V (Brewers after 08/01/05)
1 Wiring Harness, Main 200V (Brewers prior to 08/01/05)
1 Wiring Harness, Main 200V (Brewers after 08/01/05)
1 Wiring Harness, Main 120V
1 Wiring Harness, Main 200V (Brewers with Product # 33600.0019 only)
1 Wiring Harness, Transformer (120V & 120/240V models)
1 Wiring Harness, Transformer (200V & 230V models)
1 Wiring Harness, Main Power Switch
2 Wire Nut (Not used on 230V Models)
1 Jumper, Two-position (Used for programming Control Board)
1 Wiring Harness, EMI Filter to Terminal Block 230V
1 Wiring Harness, EMI Filter to Terminal Block 200V
1 Thermal Cut-off w/Lead Red 51" (230V)
- Kit, Funnel Sensors (Includes Funnel Sensor Coils W/Leads)
1 Cord Assy, Power (120V)
29
34024.3 061112