Hilti TE 700-AVR Manual Del Usuario página 12

become live, presenting a risk of electric shock, if you damage an electric
cable accidentally.
Careful handling and use of electric tools
▶ Wait until the power tool stops completely before you lay it down.
3 Description
3.1 Overview of the product
Chuck
@
Function selector switch
;
Power level selection switch
=
On/off switch
%
Grip
&
Indicators
(
Supply cord
)
3.2 Intended use
The product described is an electrically powered breaker for medium-duty
chiseling work. It is designed for removing and breaking up concrete,
masonry and stone.
▶ Operation is permissible only when connected to a power source providing
a voltage and frequency in compliance with the information given on the
type identification plate.
3.3 Active Vibration Reduction (AVR)
The breaker is equipped with an Active Vibration Reduction (AVR) system,
which reduces vibration significantly.
3.4 Service indicator
The breaker is equipped with a service indicator LED.
Status
The service indicator lights red.
The service indicator blinks red.
Note
Bring the product to Hilti Service in good time. This will help to ensure
that it's always ready for use.
6 English
Printed: 02.02.2017 | Doc-Nr: PUB / 5071172 / 000 / 05
1
Air vents
+
Knob
§
Side handle
/
Theft protection indicator (op-
:
tional)
Service indicator
∙
Power level indicator
$
Meaning
• End of service interval – servicing
is due.
• A fault has occurred in the tool.
• The overheating prevention cut-
out has been activated.
• The voltage provided by the
electric supply is too high.