Installation procedures
If the motor unit has been installed, follow
the procedures beginning on page 19 of the
Grandioso T1 Owner's Manual to remove it
before installing the arm base kit .
1
Remove the top of the leg
from the base unit.
Top of the leg
At the location where you want to
install the tonearm, turn the top of the
leg counterclockwise and remove it .
o Tonearms can be installed in two
locations: the back right and the
back left .
ATTENTION
This tonearm cannot be installed at the
front left .
4
2
Install the arm base post on
the base unit.
Referring to "Arm base post installation
diagram" on page 6, attach the arm
base post with the attachment screws .
Pin