3
Install the arm base.
Align a positioning indentation on the
underside of the arm base with the pin
on the arm base post when installing it .
Positioning indentation
When placed correctly, the tops of the
arm base and the arm base post should
be almost the same height .
If there is a large height difference
between the arm base and the arm
base post, the positioning indentation
and the pin might not be aligned . Try
installing the arm base again .
4
Fix the arm base in place.
Tighten the arm base attachment
thumbscrew to fix it in place .
o After fixing it in place, confirm that
there is no looseness in the arm base .
5
Attach the tonearm to the arm
base.
Refer to the tonearm owner's manual
for installation procedures .
6
Install the motor unit.
Following the instructions starting
with procedure 10 on page 16 of the
Grandioso T1 Owner's Manual, install the
motor unit .
5