WERKU WK400550 Instrucciones Originales página 2

ENG
CE DECLARATION CONFORMITY.
Werku ® declares that the WK400550 hoist is
►
in accordance with the European Directives and
Standards 2006/42/CE, 2014/30/EU, EN 14492-
2:2006+A1, EN 60204-32:2008, EN 55014-1:2017,
EN 55014-2:2015, EN 61000-3-2:2019 and EN
61000-3-3:2013.
La Coruña, 01/12/2020
R Yáñez
Werku Tools SA
TECHNICAL CHARACTERISTICS.
Voltage-frequency 230V~50Hz
►
Class I Protection index IP54
► ►
min Lifting capacity 500-1000 kg
-1 ►
speed 8-4 mpm Lifting height 22-11 m
►
capacity > 2500 kg
diameter 5.6 mm Net weight 31 kg
►
pressure LpA <70 dB(A)
KpA 3 dB(A) Acoustic pressure LwA <80 dB(A)
►
Respective uncertainity KwA 3 dB(A)
►
Aw <2.5 m/s² Respective uncertainity K 1.5 m/s².
►
SAFETY INSTRUCTIONS.
Read all security warnings and all instructions
►
Failure to follow all warnings and instructions
►
listed below may result in electrical shock, fire
and/or serious injury
all instructions for future reference
can be avoided in many cases by recognizing a
potentially hazardous situation before it occurs and
by observing appropriate safety procedures
not use this hoist for other applications than those
specified in this manual.
WORK AREA SAFETY.
Keep work area clean and well lit
►
and dark areas invite accidents
power tools in explosive atmospheres, such as in
the presence of flammable liquids, gases or dusts
Keep away from children and curious while
►
operating a power tool
you to lose control.
PERSONAL SAFETY.
Stay alert, watch what you are doing and use
►
common sense when operating a power tool
Do not use a power tool while tired or under
►
the influence of drugs, alcohol or medicines
moment of inattention while operating power tools
may cause damage serious personal.
Power 1600W
►
Speed rate 2500
►
Lifting
►
Cable length 22 m
►
Acoustic
►
Respective uncertainity
►
Vibration
►
Keep all warnings and
►
Accidents
►
Cluttered
►
Do not handle
►
Distractions can cause
►
USE PPE'S.
Use protection glasses according EN166
►
protection masks according EN149
the type of work, use other precise PPE.
DO NOT WORK ON TIPTOES.
Keep your feet on the ground and balance at all
►
times
►
tool in unexpected situations.
DRESS PROPERLY.
Do not wear loose clothing or jewelry
►
your hair, clothing and gloves away from moving
parts
►
caught in moving parts
connecting means for extracting and collecting
dust, make sure they are connected and properly
used
►
related hazards.
Cable
►
Cable
►
ELECTRICAL SAFETY.
The plug of the power tool must match with
►
the base of the socket
in any way
earthed power tools
matching bases will reduce the risk of electric
shock
►
surfaces such as pipes, radiators, cookers and
refrigerators
electric shock if your body is grounded
expose power tools to rain or wet conditions
Water entering the power tool will increase the
►
risk of electric shock
DO NOT ABUSE THE CORD.
Do
►
Never use the cord to carry, lift or unplug the
►
power tool
oil, sharp edges or moving parts
or entangled cords increase the risk of electric
shock
►
use an extension cord suitable for outdoor use
The use of an extension cord suitable for
►
outdoor use reduces the risk of electric shock
If the use of a power tool in a damp location is
►
unavoidable, use a power protected by a residual
current device (RCD)
reduces the risk of electric shock.
AVOID ACCIDENTAL STARTING.
Make sure the switch is in "off" position before
►
connecting to the network, or when taking or
carrying the power tool
A
►
with your finger on the switch or plugging in
2
English
This enables better control of the power
Loose clothes, jewelry or long hair can be
If there are devices for
►
The use of these devices can reduce dust
Never modify the plug
►
Do not use any adapter plug with
►
Unmodified plugs and
►
Avoid body contact with grounded
There is an increased risk of
►
Keep the cord away from heat,
►
When operating a power tool outdoors,
The use of an RCD
►
Carrying power tools
►
Use
►
If required by
►
Keep
►
Do not
►
Damaged
►