WERKU WK400550 Instrucciones Originales página 3

ENG
power tools that have the switch in "on" position
invites to accidents
►
before starting the power tool
attached to a rotating part of a power tool can
cause personal injury.
USE AND CARE OF POWER TOOLS.
Do not force the power tool
►
power tool for your application
power tool will do the job better and safer at the
rate for which it was conceived
power tool if the switch cannot be positioned
to "off" and "on" position
cannot be controlled with the switch is dangerous
and must be repaired
the power supply and/or battery before making
any adjustments, changing accessories or
storing the power tool
measures reduce the risk of starting the power
tool accidentally.
STORE POWER TOOLS.
Store power tools out of reach of children and
►
not allow the handling of power tools to people
unfamiliar with the tools or these instructions
Power tools are dangerous in the hands of
►
untrained users.
MAINTENANCE.
Check moving parts for misalignment or binding,
►
there are no broken parts or other conditions
that may affect the operation of power tools
Power tools are repaired before use when they
►
are damaged Many accidents are caused by
►
poorly maintained power tools
accessories and tool tips, etc. according to these
instructions and in the manner provided for the
particular type of power tool, taking into account
the conditions work and work to develop
of the power tool for applications other than those
intended could result in a dangerous situation
Please check your power tool serviced by a
►
Werku official repair service using only identical
®
replacement parts
►
the power tool is maintained.
CHECK THE GOOD CONDITION OF THE HOIST.
Make sure that all the screws in the hoist are
►
perfectly tightened
►
the hoist has not been used for a period, allow
the hoist to warm up by leaving it to run empty
Remove keys or tools
A left key or tool
►
Use the correct
►
The correct
►
Do not use the
►
Any power tool that
►
Remove the plug from
►
Such preventive safety
►
Use power tools,
►
►
This will ensure the safety of
In cold climates or when
for a few minutes, to ensure that all internal
components are perfectly lubricated
sure that the possible installed accessories are
perfectly fitted in place.
BEFORE STARTING WORK.
Make sure that the hoist is firmly supported
►
before using
beneath you when using the hoist in high areas
Keep your hands away from all moving parts of
►
the hoist.
DURING THE OPERATION.
Do not leave the hoist operating without having it
►
firmly fixed
have full control over it
anyone while in use
produce vibrations
loose, and possibly cause faults or accidents
your hands away from all moving parts of the hoist.
AT FINISH WORKING.
Do not touch the possible accessories installed
►
in the hoist after use
burns
►
chemicals or toxic components
these substances or allowing them to come into
contact with your skin
prevent and protect against incidents of this kind.
DESCRIPTION OF THE PRODUCT.
The hoist has been designed to carry out jobs of
►
vertical elevation
yourself with the hoist before use.
The use
3
1
3
English
Check that no one is standing
►
Only turn it on when you are sure you
►
Do not point the hoist at
►
When operating the hoist will
►
The screws may gradually come
►
It may be hot and cause
►
Some materials worked with may contain
Use PPE designed to
►
Refer to this plan to familiarize
►
4
2 9
Make
►
Keep
►
Avoid inhaling
►
5
6
8
7