Panasonic Viera TC-L32DT30 Manual De Usuario página 15

Press to exit from
a menu screen
■
Press to go back to
the previous screen
All manuals and user guides at all-guides.com
Configure Network settings
Select the Network type
Network settings Step 6 of 7
Select Ethernet cable of wireless network.
Ethernet cable Wireless(Wifi) Set later
OK
Select
Return
Select the setting mode
Network settings Step 6 of 7
Checks for proper network connection, settings and
communication to the Internet and server
automatically.
Automatic Manual
OK
Select
RETURN
Automatic
Start connection test
Network settings Step 6 of 7
Connection test
Check Ethernet cable connection
Validate IP address
Check for IP address duplication
Check connection to the Internet
Check communication with VIERA Connect server.
Test in progress...
RETURN
Complete "Network settings"
Helpful information is displayed when you
successfully complete "Network settings".
Network settings Step 6 of 7
Network settings are complete.
You can use VIERA Connect.
VIERA Connect lets you enjoy Internet contents
on your VIERA TV.
OK
Return
Adjust the Clock (Set clock)
When done, select NEXT and press OK to go to the next step.
■
Manual setting
Set clock
Step 7 of 7
Adjust the TV's date and time
Mode Manual
Year - - -
Month - - -
Day - - -
Hour - - -
Minute - - -
Time zone
DST
Next
Edit 0 - 9
Select
Change
RETURN
■
Auto setting
Set clock
Step 7 of 7
Adjust the TV's date and time
2011/4/5 6:00 AM
Mode Auto
Year
Month
Day
Hour
Minute
Time zone EST
DST Off
Next
Select
Change
RETURN
Manual: Adjust the clock manually (Year/Month/Day/Hour/Minute)
Mode
Auto: The clock is adjusted automatically via Internet service. Only
available when the TV is on a network. -->Set "Network settings" first.
Select your time zone. (EST/CST/MST/PST/AKST/HST/NST/AST)
Time zone
Set DST (Daylight Saving Time) setting. (On/Off)
DST
On: Advances the clock one hour from the time it is set according to
the time zone.
Set later: Go to
You can set in "Setup" menu later.
Wireless (WiFi): Start "Wireless network" (p. 16)
Automatic: Press OK to start setup automatically.
Error screen is displayed when
Network connection has failed.
Manual: Go to Manual setting.
Manual
■
Manual setting
Network settings
Connection test
Configure settings of the network connection.
IP setting mode
IP address
Subnet mask
Default gateway
DNS setting mode
DNS
Proxy address
Connection Proxy port
Connect test
Mac address
error
Select
Change
RETURN
■
Error screen
Network settings
Connection test
Check Ethernet cable connection
Validate IP address
Check for IP address duplication
Check connection to the Internet
Check communication with VIERA Connect server.
Connection to local network (router) failed.
Ensure wireless network availability
Retry
OK
Select
RETURN
Retry: Go to "Start connection test"
Set later: Go to
select
set or
Follow the instructions on
screen to complete the
following operations.
Step 6 of 7
Automatic
192.168.0.4
255.255.255.0
192.168.0.1
Automatic
192.168.0.1
00-00-aa-cc-33-ab
Manual
Step 6 of 7
Manual Set later
DST
Minutes
10
OK
0 9
RETURN
15