Publicidad
Idiomas disponibles
Idiomas disponibles
■
Assembling the pedestal
Fix securely with assembly screws
(Total 4 screws).
Tighten screws firmly.
A
Bracket
Front
(image: TBL5ZX0104)
■
Set-up
Fix securely with assembly screws
Tighten screws firmly.
Foam mat or
thick soft cloth
(image: TC-L32DT30)
WARNING
Do not disassemble or modify the pedestal.
Otherwise the TV may fall over and become damaged, and personal injury may result.
Caution
Do not use any pedestal other than that provided with this TV.
Otherwise the TV may fall over and become damaged, and personal injury may result.
Do not use the pedestal if it becomes warped or physically damaged.
If you use the pedestal when it is physically damaged, personal injury may result. Contact your nearest Panasonic
Dealer immediately.
During set-up, make sure that all screws are securely tightened.
If sufficient care is not taken to ensure screws are properly tightened during assembly, the pedestal will not be strong
enough to support the TV, and it might fall over and become damaged, and personal injury may result.
Place the TV at a comfortable distance for viewing. Avoid placing it where sunlight or other bright light (including reflections)
will fall on the screen. Use of some types of fluorescent lighting can reduce remote control transmitter range. Adequate
ventilation is essential to prevent an internal component failure. Keep away from areas of excessive heat or moisture.
Adjust the LCD panel
to your desired angle.
Note
Ensure that the pedestal does not hang over the edge of the base even if the TV swivels to the full rotation range.
Do not place any objects or hands within the full rotation range.
All manuals and user guides at all-guides.com
Attaching the pedestal to TV
Attach the cover
A
• Place the cover so that it covers up the screws for the bracket.
• Insert the protrusion of the cover into the opening of the bracket.
* The cover has a nick on the back.
Attach the cover so that the nick fits underneath the bracket.
Hold the bracket
not to fall over
Front
Base
(Total 4 screws).
B
B
Back of
the TV
Bracket
a
Cover
Nick on the back
of the cover
Cover
Location
15°
15°
b
(View from above)
Accessories
Assembly screws
(4 of each)
A
XSS5+15FNK
size(M5 x 15)
B
XYN4+F30FJK
size (M4 × 30)
Bracket (1)
●
TBL5ZA3119
Cover (1)
●
TBL5ZB3087
Base (1)
●
TBL5ZX0104 (TC-L32DT30)
●
TBL5ZX0106 (TC-L37DT30)
TC-L32DT30
a: 9.6 " (242 mm)
b: 13.8 " (350 mm)
TC-L37DT30
a: 10.8 " (273 mm)
b: 14.8 " (375 mm)
9
Publicidad
