Viewing 3D images on TV
You can enjoy 3D images by wearing the 3D Eyewear supplied with this TV and to view 3D broadcasts and 3D image software.
Optional Accessories (p.8)
This product cannot be used as sunglasses.
This product can be worn over vision correction glasses.
Part names and functions
Infra-red receiver
Receives infra-red signals from the television.
The liquid crystal shutter open/close timing is controlled by receiving infra-
red signals from the television, which provide 3D expression of the images.
If the eyewear stops receiving infra-red signal from the television, the power
automatically switches off after 5 minutes.
Power switch (bottom side
of 3D Eyewear)
Switches on the 3D Eyewear power.
The 3D Eyewear is turned on by setting
the power switch to "ON". Set the
power switch to "OFF" to turn off the 3D
Eyewear.
Battery status shown by indicator lamp
Power/indicator lamp status
Lights for 2 seconds when turned on
Flashes 5 times when turned on
Flashes once every 2 seconds when in use
Lights continuously when off
Lamp off
22
All manuals and user guides at all-guides.com
Basic features of 3D Eyewear
Sufficient battery level
Low battery level
Operating normally
Charging
Power off
Liquid Crystal Shutter
(lens)
Controls the images for 3D
viewing.
The left and right liquid crystal
shutters are alternately opened
and closed in time with the left
side and right side images that
are alternately displayed on the
television to achieve the 3D effect.
Charging port
Connect the charging cable.
(p. 23)
Indicator lamp
Lights or flashes during use or
charging to show the status of
the rechargeable battery.
Battery status