Publicidad
Idiomas disponibles
Idiomas disponibles
EN
Ref.
Description
Extension nozzle
①
Hood
②
Round brush
③
Angled nozzle
④
Upholstery brush
⑤
Window brush
⑥
Floor brush
⑦
Filling the boiler tank before use
•
Unscrew the boiler tank filler cap (A), and use the funnel (
level (
).
1
•
Screw on the boiler tank filler cap (A).
•
Fit the required tool (see the "
stains), insert the detergent following the instructions in the paragraph "USING WITH DETERGENT".
Switching on
•
Plug the appliance power cord into the mains electricity and switch on the appliance using the On/off switch (F); the On/off
light (E) will switch on, as will the steam ready light (D) (
•
After a few minutes, the steam ready light (D) will switch off to show that the boiler tank is pressurised and the appliance
can now dispense steam.
Operation
•
The steam ready light (D) will switch on and off during use to show that the boiler tank is working.
•
To prevent the steam from being dispensed accidentally, the lock cursor (N) must be moved from the left to the right
to release the steam function, move the cursor (N) from right to left( ) (
•
To dispense steam, press the button (O) on the gun (M).
•
When using for the first time, it is a good idea to spray the steam jet into a container to get rid of any water residues that
might be inside the tube (any water coming out is because of the condensed steam inside the tube). This action needs to
be repeated even after a few minutes of appliance inactivity. In any case, when the gun begins to dispense steam, always
point the jet downwards to the ground.
IMPORTANT: When the appliance is not being used, always lock the steam dispenser button with the cursor
(N).
Switching off the appliance
•
To stop dispensing steam, release the dispensing button (O).
•
After use, switch off the appliance, using the switch (F) and unplug it from the mains power socket. Clean the attachments
and boiler tank as described in the "CLEANING AND MAINTENANCE" section.
•
Wind the power cord around the cord rewinder (B)
•
Refit the gun (M) over the special handle (C), after placing the slider (N) in the lock position.
The following steam appliance is fitted with an innovative, integrated detergent function to be used for stubborn dirt
removal; it is an additional function and does not replace the use of steam.
•
Remove the cap (I) on the appliance body (G), and use the funnel (
(
).
5
IMPORTANT: Do not use tools to remove the cap (I) as they might damage it.
DESCRIPTION OF ATTACHMENTS
Ref. Description
INSTRUCTIONS FOR USE
⑩) provided to fill the boiler tank without exceeding the maximum
ATTACHMENTS" paragraph) to the gun (M) and only if strictly necessary (e.g. stubborn
(
).
4
USING WITH DETERGENT
- 14 -
Extension tubes
⑧
Attachment bag
⑨
Funnel
⑩
Detergent bottle
⑪
Measure
⑫
Floor cloth
⑬
Upholstery cloth
⑭
).
2
).
3
⑩) provided to fill the appliance's detergent reservoir
( );
Publicidad
