Sangean WR-2CL Manual Del Usuario página 10

Wake to buzzer alarm
A beep tone will sound when using the buzzer alarm.
The alarm beep will increase in volume every 15 seconds for one
minute followed by one minute silence before repeating the cycle.
The buzzer alarm will sound for one hour unless turned off by
pressing the On/Off button. Pressing the On/Off button whilst the
alarm is sounding will cancel the alarm for 24 hours.
1. When the radio is off, press and release Display button,
LCD display will flash alarm icon
previous alarm time.
Note:
when the radio is on, press and release Display button until
display flashes alarm status
2. During the flash, long press SET button until hour and minute
digits also alarm mode flash in the display.
3. Press Hour and Minute button separately or rotary tuning control
to set required alarm time.
4. Press and release Select button to select buzzer alarm,
display will flash
5. Press and release SET button to complete alarm time setting.
Display will be back to real time after alarm setting with alarm
buzzer icon on the display indicating buzzer alarm is set.
You can monitor the alarm time by pressing Display button.
9
with a beep and
.
.