Publicidad
Idiomas disponibles
Idiomas disponibles
company of an experienced person. The cutting tool of this machine is very sharp. It is dangerous
to use this machine improperly.
W
!
Only lend this machine to persons who are familiar with this type of machine
ARNING
and know how to use it. Always lend the machine along with the user instruction manual so the
new user can carefully read it and understand it. This machine is dangerous in the hands of
untrained users.
Place the machine on a flat surface and stable to start it.
Create a work area with a width of 3 meters and a length of 10 meters in the direction where the
residues are expelled. During the shredding process, the users must ensure that nobody is
injured with the material expelled from the machine. Mark the working area with for example
red and white beacons.
Place the switch in the off position always when:
•
The machine is not being watched over;
• Maintenance work is being carried out;
• The entry and exit tubes have been removed.
Carry out periodic maintenance inspections (see "Maintenance and service" section).
2.2.P
S
ERSONAL
AFETY
Stay alert, watch what you are doing and use common sense when operating this machine.
Do not use this machine when you are tired or under the influence of drugs, alcohol or
medication. A moment of inattention while operating this machine can cause serious personal
harm.
Remove all keys or hand tools from the machine and the work area before starting the machine.
A wrench or tool left near the machine may be touched by a part of the machine in motion and
to project itself causing personal injury.
Do not exceed yourself. Keep both feet firmly in place on the ground and maintain balance at all
times.
When using this machine, wear the following protective equipment: Eye and hearing protection
and safety gloves.
The noise caused by this machine can cause hearing damage. Use auditory protection.
Dress properly. Do not wear loose clothing or jewellery.
２
Publicidad
