ExecutiveSafe CS-2 Manual De Usuario página 5

Lock Out Function
If a wrong code is entered three times in a row, the safe will begin a 20 second secure lockout
period.
If the wrong combination is entered 3 more times after the first lockout period the safe will begin
the 5 minute secure lockout period.
During this secure lockout period the keypad will become disabled, the yellow LED will flash
followed by a buzzer beep for the entire secure lockout period.
Once the secure lockout period has expired, the safe can be unlocked using the correct
combination. You may use the override key to open safe, but the keypad has to complete the
secure full lockout period.
Opening and Closing your Safe
Opening the Safe:
Note: Make sure the knob is completely turned counter clock wise.
Enter your Combination or Master Code followed by the "A" or "B" buttons.
The Green LED light marked PROCEED will come on. While the Green light is on turn the
knob clock wise and open the door.
Closing the Safe:
Close the door and turn the knob counter clockwise.