Publicidad
Idiomas disponibles
Idiomas disponibles
•
Turn the appliance on from the start button and select air flow/
temperature (0-I-II) (3) adjusting it based on your needs:
0=OFF
I= medium air flow/medium temperature
EN
II= high air flow/high temperature
•
Take a lock of hair and comb it with the appliance switched
on, from the roots to the ends, to prepare it for styling and
eliminating the frizzy effect (recommended in two steps).
•
Lift the lock of hair, taking care to lift it away from the underlying
hair and positioning the air styler at the roots, diagonally.
•
Hold down the rotation key (2) to the right or the left, depending
on the desired movement and the side being treated.
•
The lock of hair automatically twists, creating a spiral ringlet.
It is important to guide the rotational movement by sliding
the air styler along the lock of hair, towards the ends, until
completely released.
•
For greater styling definition we recommend repeating this
movement two or three times on each lock of hair.
•
Complete styling on the remaining locks of hair.
•
For the best effect, let the created ringlets cool.
•
Finish off styling by breaking up the ringlets with your fingers,
from the roots to the ends: this will achieve soft waves.
o n .
MAINTENANCE AND CLEANING
Cleaning the appliance and accessories
Clean the appliance with a damp cloth, when necessary. Do
not use solvents or other aggressive or abrasive detergents.
Otherwise, the surface could be damaged. Check the intake filter
on the appliance regularly (4) and remove all accumulated dust
and hair.
WARNING!
the appliance from the socket
before cleaning or performing
maintenance.
WARNING! Make sure all cleaned parts
are completely dry before reusing the
appliance.
Always
14
disconnect
Publicidad
