Fanimation AIRE DELUXE SHOWROOM FP6244 Serie Manual Del Usuario página 12

How to Assemble Your Switch Cup Assembly/Light Kit Assembly (Continued)
4A—FP6244**. Assemble the switch cup assembly to
the switch housing adapter using the previously removed
screws and securely tighten all screws. (Figure 4A)
4B—FP6245**. Assemble the light kit assembly to the
switch housing adapter using the previously removed
screws and securely tighten all screws. (Figure 4B)
NOTE: If you have installed your fan without light kit (FP6244**)
skip Steps 5 and 6.
5. Insert light bulbs into sockets. (Figure 5)
To reduce the risk of electric shock, disconnect
the electrical supply circuit to the fan before
installing light kit.
6. Disassemble the finial, trim cover and nut in light kit
assembly. Securely attach the glass to light kit assembly
using supplied nut, trim cover and finial. Do not over
tighten. (Figure 6)
CAUTION
FP6244**
Switch Cup
Assembly
Figure 4A
Light Kit
Assembly
Light Kit Assembly
12
FP6245**
Light Kit
Assembly
Figure 4B
Bulb
Figure 5
Glass
Nut
Trim Cover
Finial
Figure 6