Termat CANTOS Serie Manual De Usuario página 53

OPERATING INSTRUCTIONS
OPERATING INSTRUCTIONS
COOLING MODE
The cooling function allows the air condit-
ioner to cool the room and at the same time
reduces Air humidity.
To activate the cooling function ( COOL ) , press the
MODE button until the symbol
the display.
With the button or
that of the room.
HEATING MODE
The heating function allows the air conditi-
oner to heat the room.
To activate the heating function ( HEAT ) , press the
MODE button until the symbol
the display.
With the button or
that of the room.
In HEATING operation, the appliance can automatically
activate a defrost cycle, which is essential to clean the
frost on the condenser so as to recover its heat exchange
function. This procedure usually lasts for 2-10 minutes.
During defrosting, indoor unit fan stop operation.
After defrosting, it resumes to HEATING mode
automatically.
DRY MODE
This function reduces the humidity of the
air to make the room more comfortable.
To set the DRY mode , Press MODE until
appears in the display. An automatic
function of pre-setting is activated.
appears on
set a temperature lower than
appears on
set a temperature higher than
51
MODE ECO
TIMER
SLEEP
FAN
DISPLAY
SWING
SWING
HEALTH TURBO
MODE
ECO
TIMER
SLEEP
FAN
DISPLAY
SWING SWING
HEALTH TURBO
MODE
ECO
TIMER
SLEEP
FAN
DISPLAY
SWING SWING
HEALTH TURBO